TIMKEN 3198-3120 tapered roller bearings | Bearing Kingdom | Supply Bearing in stock | Best Bearing Service | Bearing Manufacturer‎-www.bearingkingdom.com

BEARING CATEGORIES

TIMKEN 3198-3120 tapered roller bearings

Inside Diameter: 28.575 mm

Outside Diameter: 72.626 mm

Width: 30.163 mm

Basic dynamic load rating: 94.8 kN

Basic static load rating: 102 kN

Dimensions
model	3198-3120
Cone Part Number	3198
Cup Part Number	3120
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.600 Kg 1.40 lb
d - Bore	28.575 mm 1.1250 in
D - Cup Outer Diameter	72.626 mm 2.8593 in
B - Cone Width	29.997 mm 1.1810 in
C - Cup Width	23.813 mm 0.9375 in
T - Bearing Width	30.163 mm 1.1875 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.270 mm 0.050 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	37.08 mm 1.46 in
db - Cone Backface Backing Diameter	39.12 mm 1.54 in
Da - Cup Frontface Backing Diameter	67.10 mm 2.68 in
Db - Cup Backface Backing Diameter	60.96 mm 2.40 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	0.8 mm 0.03 in
a - Effective Center Location	-10.2 mm -0.4 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	24600 N 5520 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	94800 N 21300 lbf
C0 - Static Radial Rating	102000 N 22800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	14000 N 3140 lbf
Factors
K - Factor	1.76
e - ISO Factor	0.33
Y - ISO Factor	1.8
G1 - Heat Generation Factor (Roller-Raceway)	23.4
G2 - Heat Generation Factor (Rib-Roller End)	8.76
Cg - Geometry Factor	0.0697