TIMKEN 17118-S-17244 tapered roller bearings | Bearing Kingdom | Supply Bearing in stock | Best Bearing Service | Bearing Manufacturer‎-www.bearingkingdom.com

BEARING CATEGORIES

TIMKEN 17118-S-17244 tapered roller bearings

Inside Diameter: 30 mm

Outside Diameter: 61.999 mm

Width: 16.002 mm

Basic dynamic load rating: 43.2 kN

Basic static load rating: 44.1 kN

Dimensions
model	17118-S-17244
Cone Part Number	17118-S
Cup Part Number	17244
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
d - Bore	30 mm 1.1811 in
D - Cup Outer Diameter	61.999 mm 2.4409 in
B - Cone Width	16.566 mm 0.6522 in
C - Cup Width	14.288 mm 0.5625 in
T - Bearing Width	16.002 mm 0.6300 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	34.54 mm 1.36 in
db - Cone Backface Backing Diameter	37.08 mm 1.46 in
Da - Cup Frontface Backing Diameter	57.40 mm 2.26 in
Db - Cup Backface Backing Diameter	54.10 mm 2.13 in
Ab - Cage-Cone Frontface Clearance	2.5 mm 0.1 in
Aa - Cage-Cone Backface Clearance	-0.5 mm -0.02 in
a - Effective Center Location	-3.6 mm -0.14 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	11200 N 2520 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	43200 N 9720 lbf
C0 - Static Radial Rating	44100 N 9910 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	7340 N 1650 lbf
Factors
K - Factor	1.53
e - ISO Factor	0.38
Y - ISO Factor	1.57
G1 - Heat Generation Factor (Roller-Raceway)	11.8
G2 - Heat Generation Factor (Rib-Roller End)	7.49
Cg - Geometry Factor	0.0579